Registered No. 950808
F-Gas Registered
How much does a new combi boiler cost in Glasgow?
For a standard gas boiler replacement in Glasgow, Doherty Plumbing & Gas currently publishes packages from £1,600, with higher-priced options from…
Read full answer →Doherty Answers · Glasgow
Plumbing, heating, boiler & air conditioning answers
Straight answers to the questions Glasgow customers ask about boilers, heating, bathrooms, plumbing and domestic air conditioning.
100helpful answers published
Boilers & Heating
55 answersQuestions & answers
What is included in a standard new boiler package in Glasgow?
Doherty's standard Glasgow gas-boiler packages include considerably more than simply supplying the appliance. The published package specification includes…
Read full answer →Is a combi boiler suitable for a Glasgow flat?
A combi boiler can be a very good fit for many Glasgow flats because it provides heating and hot water without needing a separate hot-water cylinder. That…
Read full answer →What type of boiler is best for a Glasgow tenement?
There is no single boiler type that is automatically best for every Glasgow tenement. Many tenement flats suit a modern combi because it saves cylinder…
Read full answer →Can I move my boiler to a different room in a Glasgow home?
Often yes, but moving a boiler is more involved than replacing one in the same position. In a Glasgow property the new location has to work for the gas…
Read full answer →Can a boiler be installed in a loft in Glasgow?
A loft can sometimes be used for a boiler in a Glasgow house, but it has to be a practical and safe service location. The installer needs to consider…
Read full answer →Can a gas boiler be installed in a bathroom in Glasgow?
A gas boiler can sometimes be installed in a bathroom, but the exact position matters because bathrooms contain defined electrical zones and high levels…
Read full answer →Can I hide my boiler inside a kitchen cupboard in Glasgow?
Many modern boilers can be installed inside suitable kitchen cabinetry, but the cupboard design has to follow the boiler manufacturer's requirements for…
Read full answer →Should I repair or replace an old boiler in Glasgow?
Replacement is not automatically the right answer just because a boiler is old. If the fault is clear, parts remain available and the appliance has…
Read full answer →Why do I have no heating and no hot water from my boiler in Glasgow?
If both heating and hot water have stopped, start with the safe user checks in the boiler manual: confirm the appliance has power, the controls are…
Read full answer →Why does my boiler pressure keep dropping in Glasgow?
A boiler that repeatedly loses pressure needs investigation rather than constant topping up. Possible causes include a small leak somewhere on the heating…
Read full answer →Why is my boiler pressure too high in Glasgow?
Boiler pressure normally rises somewhat as the heating warms up, but a large or persistent increase can point to a system fault. Common possibilities…
Read full answer →Why is my boiler making a banging noise in Glasgow?
Banging from a boiler or heating system can have several causes, including poor circulation, trapped air, pump issues, scale or sludge, rapid temperature…
Read full answer →Why is my boiler whistling in Glasgow?
A whistling or high-pitched noise can be caused by restricted water flow, scale, air, a pump or valve issue, or another internal fault. It is sometimes…
Read full answer →Why does my boiler keep locking out in Glasgow?
A lockout is the boiler protecting itself after detecting a condition it cannot safely or reliably operate through. The cause might be ignition failure…
Read full answer →Why do I have hot water but no central heating in Glasgow?
If hot water still works but the radiators do not, the boiler is clearly capable of firing for at least one demand, so the fault may be on the…
Read full answer →Why do I have central heating but no hot water in Glasgow?
If the radiators heat normally but there is no hot water, the likely checks depend on whether you have a combi boiler or a system with a hot-water…
Read full answer →Why are my radiators cold at the top in Glasgow?
A radiator that is warm at the bottom but cold across the top often contains trapped air. Bleeding the radiator may restore full circulation if air is the…
Read full answer →Why are my radiators cold at the bottom in Glasgow?
When a radiator is hot at the top but noticeably cold across the bottom, restricted circulation or deposits inside the radiator can be one possible cause…
Read full answer →Why is only one radiator cold in my Glasgow home?
If every other radiator heats normally, the problem is likely to be local to that radiator or its branch rather than a complete boiler fault. Check that…
Read full answer →Why does my Glasgow home take so long to heat up?
Slow warm-up can be caused by more than boiler size. The heating controls, flow temperature, radiator output, system balance, circulation, insulation and…
Read full answer →Why does my boiler keep turning on and off in Glasgow?
Frequent short on-and-off cycles can happen when the boiler reaches temperature very quickly or cannot transfer heat through the system as expected…
Read full answer →What should I do if my boiler condensate pipe freezes in Glasgow?
A frozen condensate pipe can stop a condensing boiler during very cold weather, particularly where part of the drain runs externally. The boiler may show…
Read full answer →Is a leaking boiler an emergency in Glasgow?
A leaking boiler should not be ignored. The urgency depends on where the water is coming from, how quickly it is leaking and whether it is affecting…
Read full answer →How often should I service my boiler in Glasgow?
For most domestic boilers, an annual service is a sensible routine and is commonly required by manufacturers to maintain warranty conditions. Energy…
Read full answer →Should I service my boiler before winter in Glasgow?
Yes, if your annual service is due, arranging it before the main heating season is practical. It lets you test the system while there is still time to…
Read full answer →What happens during a boiler service in Glasgow?
A proper boiler service should follow the manufacturer's procedure and check that the appliance is operating safely and correctly. The exact steps vary by…
Read full answer →Do I need a Gas Safe registered engineer for boiler work in Glasgow?
Yes for gas work. Gas Safe Register states that anyone carrying out gas work as part of a business must be competent and registered. That includes…
Read full answer →How long does a boiler replacement take in Glasgow?
A straightforward like-for-like boiler replacement can often be completed much faster than a system conversion or relocation, but the exact duration…
Read full answer →Is it cheaper to replace a boiler in the same position in Glasgow?
Usually, yes. Replacing a boiler in the same suitable position can reduce the amount of new gas pipe, heating pipework, flue work, condensate routing…
Read full answer →Can I change from a system boiler to a combi boiler in Glasgow?
Often yes, but the conversion should be based on hot-water demand and incoming water performance rather than simply removing the cylinder to save space. A…
Read full answer →Can I replace an old regular boiler with a combi in Glasgow?
It is often possible to replace an older regular boiler and cylinder arrangement with a combi, but it is a system conversion rather than a simple…
Read full answer →Is a combi boiler suitable for a Glasgow home with two bathrooms?
Sometimes, but two bathrooms make hot-water demand more important. A combi heats water as it is used, so its real-world performance depends on the…
Read full answer →Does low water pressure affect a combi boiler in Glasgow?
Yes. A combi relies on the incoming cold-water supply to provide domestic hot water on demand. If the incoming flow or pressure is poor, fitting a larger…
Read full answer →Do I need a magnetic filter with a new boiler in Glasgow?
A magnetic filter is commonly used to help capture magnetic debris circulating in a central-heating system. That debris can come from corrosion inside…
Read full answer →What is a MagnaCleanse flush and why might a Glasgow boiler need one?
MagnaCleanse is a method of cleaning magnetic debris from a central-heating system using specialist equipment and magnetic separation. It can help remove…
Read full answer →Does my heating system need cleaning before a new boiler in Glasgow?
The system water should be assessed and appropriately cleaned as part of a professional boiler replacement. Connecting a new boiler to contaminated water…
Read full answer →Is a Hive thermostat included with Doherty boiler installations in Glasgow?
Yes. Doherty's published standard gas boiler packages currently include a Hive Mini smart thermostat. That gives the homeowner time and temperature…
Read full answer →Are smart heating controls worth installing in Glasgow?
They can be, particularly if your current controls are basic or do not match how you use the house. Smart controls can make it easier to set heating…
Read full answer →Should I fit thermostatic radiator valves in my Glasgow home?
Thermostatic radiator valves, or TRVs, are useful because they let individual rooms reduce radiator flow as the room reaches the chosen temperature. This…
Read full answer →What boiler flow temperature should I use in Glasgow?
There is no single perfect flow temperature for every Glasgow home. Lowering the radiator flow temperature can improve the efficiency of a condensing…
Read full answer →What room thermostat temperature should I use in Glasgow?
For most people, Energy Saving Trust suggests setting the room thermostat to the lowest comfortable temperature, typically somewhere around 18°C to…
Read full answer →What size boiler do I need for a Glasgow home?
Boiler size should be based on actual heat and hot-water demand, not simply the number of bedrooms. For a combi, the required hot-water performance often…
Read full answer →Which boiler brand is best for a Glasgow home?
There is no universal best brand for every Glasgow home. The better choice is the boiler that matches the property's hot-water demand, heating system…
Read full answer →How much is a Worcester Bosch boiler installation in Glasgow?
Doherty's current published standard package prices include Worcester Bosch Greenstar options from £1,995, with other Greenstar 4000 packages priced…
Read full answer →How much is a Vaillant boiler installation in Glasgow?
Doherty currently lists the Vaillant ecoFIT Pure 30kW as a standard gas boiler package from £2,395. The package is intended as a standard replacement and…
Read full answer →How much is an Ideal boiler installation in Glasgow?
Doherty's current published package list includes the Ideal Logic Max 30kW from £2,195 for a standard gas boiler replacement. That starting price is…
Read full answer →How much is a Navien boiler installation in Glasgow?
Doherty currently advertises Navien NCB 300 standard gas boiler packages from £1,600 for the 30kW model and from £1,750 for the 37kW model. Those prices…
Read full answer →Do you install oil boilers in Glasgow?
Yes. Doherty's boiler service includes oil boiler installation as well as gas boiler work. Oil replacements are not included in the fixed gas package…
Read full answer →Should I replace an oil boiler with gas in Glasgow?
That depends on whether a suitable gas supply is available and what changes would be required to the property. Moving from oil to gas is not simply a…
Read full answer →Where can a new boiler flue be positioned in Glasgow?
The flue position is controlled by the boiler manufacturer's instructions and applicable installation standards. It needs safe clearances from openings…
Read full answer →Where should the boiler condensate pipe go in a Glasgow property?
Modern condensing boilers produce acidic condensate that must discharge to a suitable drain using an appropriate route and materials. An internal route is…
Read full answer →Do I need a carbon monoxide alarm with a new boiler in Glasgow?
A carbon monoxide alarm is an important additional safety measure in a home with fuel-burning appliances. It does not replace correct installation…
Read full answer →Will old pipework cause problems with a new boiler in Glasgow?
Not necessarily, but older pipework should be assessed before a new boiler is connected. Age alone does not mean all pipes need replacing, yet corrosion…
Read full answer →What photos should I send for a boiler quote in Glasgow?
Useful photographs can make an initial boiler quotation much more accurate. Send a clear front view of the existing boiler, the pipework directly beneath…
Read full answer →